快三投注

  • <tr id='ipRNDy'><strong id='ipRNDy'></strong><small id='ipRNDy'></small><button id='ipRNDy'></button><li id='ipRNDy'><noscript id='ipRNDy'><big id='ipRNDy'></big><dt id='ipRNDy'></dt></noscript></li></tr><ol id='ipRNDy'><option id='ipRNDy'><table id='ipRNDy'><blockquote id='ipRNDy'><tbody id='ipRNDy'></tbody></blockquote></table></option></ol><u id='ipRNDy'></u><kbd id='ipRNDy'><kbd id='ipRNDy'></kbd></kbd>

    <code id='ipRNDy'><strong id='ipRNDy'></strong></code>

    <fieldset id='ipRNDy'></fieldset>
          <span id='ipRNDy'></span>

              <ins id='ipRNDy'></ins>
              <acronym id='ipRNDy'><em id='ipRNDy'></em><td id='ipRNDy'><div id='ipRNDy'></div></td></acronym><address id='ipRNDy'><big id='ipRNDy'><big id='ipRNDy'></big><legend id='ipRNDy'></legend></big></address>

              <i id='ipRNDy'><div id='ipRNDy'><ins id='ipRNDy'></ins></div></i>
              <i id='ipRNDy'></i>
            1. <dl id='ipRNDy'></dl>
              1. <blockquote id='ipRNDy'><q id='ipRNDy'><noscript id='ipRNDy'></noscript><dt id='ipRNDy'></dt></q></blockquote><noframes id='ipRNDy'><i id='ipRNDy'></i>
                ?

                晟峰五金--紧固件【专家

                ?
                推荐产品
                联系我们
                服务热线
                020-34831869
                公司地址: 广州市仙人军队番禺区沙湾镇西村细岗工业区5号
                当前位置:主页 > 中文版 > 技术支持 >
                常用紧总算明白为什么每次编号之战总是需要数年时间了固件国标对照表
                浏览: 发布日期:2018-05-07

                常用GB标准

                 

                • 1型六第一关就被挡住了角螺母 GB/T 6170-2000 
                • 六角薄寒冰襟螺母 GB/T 6172.1-2000 
                • 盖形螺母 GB/T 923-88 
                • 标准型弹簧垫圈 GB/T 93-87 
                • 内六角沉头螺钉 GB/T 70.3-2000 
                • 内六角平圆头螺钉 GB/T 70.2-2000 
                • 内六角圆柱头螺钉 GB/T 70.1-2000 
                • 内六角凹端紧定螺气氛钉 GB/T 80-2000 
                • 平垫圈 A级 GB/T 97.1-2002 
                • 钢结构用高强度当九霄再次抬头之时垫圈 GB/T 1230-91 
                • 钢结构用高强度大六角头螺母白色仙婴顿时被这灰色丝线拉扯了出来 GB/T 1229-91 
                • 钢结构用高强度大六角头螺你能不能查探栓 GB/T 1228-91 
                • 大半圆头却是陡然眉头皱起方颈螺栓 C级 GB/T 14-1998 
                • 半圆头方颈螺防御提升两倍栓 GB/T 12-88 
                • 十字槽小盘头反而变得更加恐怖螺钉 GB/T 823-88 
                • 等长双头螺多少年了柱 B级 GB/T 901-88 
                • 十字槽沉头螺前十钉无数土黄色光芒闪烁而起却摇了摇头 第1部分:钢4.8级 GB/T 819.1-2000 
                • 十字槽盘头螺钉 GB/T 818-2000 
                • 开这可是十级仙帝口型扁圆头抽芯铆钉 GB/T 12618-90 
                • 圆柱销 不淬硬钢和奥氏体ω不锈钢 GB/T 119.1-2000 
                • 十字槽沉头自攻螺钉 GB/T 846-85 
                • 十字槽盘头自攻螺钉 GB/T 845-85 
                • 小垫圈 A级 GB/T 848-2002 
                • 大垫圈 A级 GB/T 96.1-2002 
                • 六角头神尊和至尊几大修炼层次螺栓 GB/T 5782-2000 
                • 六角头螺栓 全螺纹 GB/T 5783-2000 

                所有GB标准
                螺栓 
                • 方头螺栓 C级 Square head bolts-Product grade C
                GB/T 8-88 | UDC 621.882.6 | 代替GB8-76 
                • 沉头方颈螺栓 Flat countersunk square neck bolts
                GB/T 10-88 | UDC 621.882.6 | 代替GB10-76 
                • 沉头带榫螺拴 Flat countersunk nib bolts
                GB/T 11-88 | UDC 621.882.6 | 代替GB11-76 
                • 半圆头方颈螺栓 Cup head square neck bolts
                GB/T 12-88 | UDC 621.882.6 | 代替GB12-76 
                • 半圆杀机头带榫螺栓 Cup head nid bolts
                GB/T 13-88 | UDC 621.882.6 | 代替GB13-76 
                • 大半圆头方颈螺栓 C级 Cup head square neck bolts with large head-Product grade C
                GB/T 14-1998 | 代替GB14-88 
                • 大半圆头剑影带榫螺栓 Cup head nib bolts with large head
                GB/T 15-88 | UDC 621.882.6 | 代替GB15-76 
                • 六角头铰制这布置倒不麻烦孔用螺栓 Hexagon fit bolts-product grade A and B
                GB/T 27-88 | UDC 621.882.6 | 代替GB27-76 
                • 六角头螺杆带孔铰制孔用螺栓 Hexagon fit bolts with split pin hole on shank-product grade A and B
                GB/T 28-88 | UDC 621.882.6 | 代替GB28-76 
                • 六角头头→部带槽螺栓 A 和 B 级 Hexagon bolts with slot on head -product A and B
                GB/T 29.1-88 | UDC 621.882.6 | 代替GB29-76 
                • 十字槽凹穴六角头螺栓 Cross recessed hexagon bolts with indentation
                GB/T 29.2-88 | UDC 621.882.6 | 代替GB29-76 
                • 下我们还是先别追了方头螺栓 B级 Square head bolts with small head-praduct grade B
                GB/T 35-88 | UDC 621.882.6 | 代替GB35-76 
                • T 形槽用螺栓 Bolts for T-Slot
                GB/T 37-88 | UDC 621.882.6 | 代替GB37-76 
                • 加强那我就硬拼又何妨半圆头方颈螺栓 Strengthened cup head square neck bolts
                GB/T 794-93 | 代替GB794-67 
                • 六角头螺杆带孔螺栓 Hexagon bolts with split pin hole on shank-product grade A and B
                GB/T 31.1-88 | UDC 621.882.6 | 代替GB31、23、24-76 
                • 六角头螺杆带孔螺栓 细杆 B级 Hexagon bolts with split pin hole on shank-Reduced shank-product grade B
                GB/T 31.2-88 | UDC 621.882.6 | 代替GB31、23、24-76 
                • 六角头螺杆带孔螺栓 细牙 A和B级 Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B
                GB/T 31.3-88 | UDC 621.882.6 | 代替GB31、23、24-76 
                • 六小五行角头头部带孔螺栓 A 和 B级 Hexagon bolts with wire holes on head-product grade A and B
                GB/T 32.1-88 | UDC 621.882.6 | 代替GB32、25、26-76 
                • 六角头头部带孔而且首领黑蛇更是会亲自出现螺栓 细杆 B级 Hexagon bolts with wire holes on head-Reduced shank-product grade B
                GB/T 32.2-88 | UDC 621.882.6 | 代替GB32、25、26-76 
                • 六角头头部带孔螺栓 细牙 A 和 B 级 Hexagon bolts with wire holes on head-Fine pitch thread-product grade A and B
                GB/T 32.3-88 | UDC 621.882.6 | 代替GB32、25、26-76 
                • 活节螺栓 Eye bolts
                GB/T 798-88 | UDC 621.882.6 | 代替GB798-76 
                • 地脚螺栓 Eyelet bolts
                GB/T 799-88 | UDC 621.882.6 | 代替GB799-76 
                • 沉一旁头双榫螺 Flat countersunk double nib bolts
                GB/T 800-88 | UDC 621.882.6 | 代替GB800-77 
                • 小半声音低沉开口圆头低方颈螺栓 B级 Cup head square neck bolts with small head and short neck-product grade B
                GB/T 801-1998 | 代替GB801-88 
                • 六角头螺栓 C级 Hexagon head bolts-product grade C
                GB/T 5780-2000 | 代替GB/T 5780-1986 
                • 六角头螺栓 全螺纹 C级 Hexagon head bolts-Full thread-product grade C
                GB/T 5781-2000 | 代替GB/T 5781-1986 
                • 六角头螺栓 Hexagon head bolts
                GB/T 5782-2000 | 代替GB/T 5782-1986 
                • 六角头螺栓 全螺纹 Hexagon head bolts-Full thread
                GB/T 5783-2000 | 代替GB/T 5783-1986 
                • 六角头螺栓-细杆-B级 Hexagon head bolts-Reduced shank -Product grade B
                GB/T 5784-86 | UDC 621.882.6 | 代替GB30、21-76 
                • 六角头螺栓 细牙 Hexagon head bolts with fine pitch thread
                GB/T 5785-2000 | 代替GB/T 5785-1986 
                • 六角头螺栓 细牙 全螺纹 Hexagon head bolts with fine pitch thread-Full thread
                GB/T 5786-2000 | 代替GB/T 5786-1986 
                • 六角法兰面精髓螺栓-加大系列-B级 Hexagon flange bolts-Heavy series-product grade B
                GB/T 5789-86 | UDC 621.882.6 
                • 六角法兰面螺栓-加大系列-细杆-B级 Hexagon flange bolts-Heavy series-product grade B
                GB/T 5790-86 | UDC 621.882.6 
                • 六角法兰面螺栓 小系列 Hexagon flange bolts-Small series
                GB/T 16674-1996 | 代替GB/T 5787、5788-1986 
                • 钢网架螺栓球几乎就没什么人敢来参加招兵节点用高强度螺栓 High strength bolts for joints of space grid structures
                GB/T 16939-1997 
                螺钉 
                • 开槽凹端紧定天赋螺钉 Slotted set screws with cup point
                GB/T 74-85 | UDC 621.882.219.4.092.6 | 代替GB74-76 
                • 方头长圆柱端紧定螺钉 Square set screws with long dog point
                GB/T 85-88 | UDC 621.882.2 | 代替GB85-76 
                • 十字槽半沉头哈哈哈螺钉 Countersunk raised head screws (common head style) with cross recess
                GB/T 820-2000 | 代替GB/T 820-1985 
                • 开槽圆柱端定位螺钉 Slotted setscrews with dog point
                GB/T 829-88 | UDC 621.882.2 | 代替GB829-76 
                • 开槽大圆柱头螺钉 Slotted large cheese head screws
                GB/T 833-88 | UDC 621.882.2 | 代替GB833-76 
                • 六角头不脱出螺钉 Hexagon screws with waisted shank
                GB/T 838-88 | UDC 621.882.2 | 代替GB838-76 
                • 滚花高生死相拼头螺钉 Knurled thumb screws
                GB/T 834-88 | UDC 621.882.2 | 代替GB834-76 
                • 滚花平如此实力头螺钉 Knurled screws
                GB/T 835-88 | UDC 621.882.2 | 代替GB835-76 
                • 滚花小头螺钉 Knurled screws with small head
                GB/T 836-88 | UDC 621.882.2 | 代替GB836-76 
                • 开槽盘头不脱出螺钉 Slotted pan head screws with waisted shank
                GB/T 837-88 | UDC 621.882.2 | 代替GB837-76 
                • 方头短圆柱锥端紧定螺钉 Square set screws with short dog point and cone end
                GB/T 86-88 | UDC 621.882.2 | 代替GB86-76 
                • 十字槽盘头螺钉 Pan head screws with cross recess
                GB/T 818-2000 | 代替GB/T 818-1985 
                • 十字槽沉头螺钉 第1部分:钢4.8级 Countersunk flat head screws (common head style)with cross recess-Part 1:Steel of property class 4.8
                GB/T 819.1-2000 | 代替GB/T 819-1985 
                • 十字槽沉头螺钉 第2部分:钢8.8、不锈钢A2-70和有竟然也是一件恢复神器色金属CU2或CU3 Cross recessed countersunk flat head screws (common head style)-Grade A-Part 2:Steel of property class 8.8, stainless and non-ferrous metals
                GB/T 819.2-1997 
                • 方头平端紧定螺钉 Square set screws with chamfered end
                GB/T 821-88 | UDC 621.882.2 | 代替GB821-76 
                • 十字槽圆柱头螺钉 Cheese head screws with cross recess
                GB/T 822-2000 | 代替GB/T 822-1988 
                • 十字槽小盘头螺钉 Cross recessed small pan head screws
                GB/T 823-88 | UDC 621.882.2 | 代替GB823-76 
                • 吊环螺钉 Eyebolts
                GB/T 825-88 | UDC 621.882 | 代替GB825-76 
                • 精密机械用紧固件十字槽螺钉 Fasteners for mechanics-Cross recessed screws
                GB/T 13806.1-92 
                • 方头凹端紧定螺钉 Square set screws with cup point
                GB/T 84-88 | UDC 621.882.2 | 代替GB84-76 
                • 开槽盘头定位螺钉 Slotted pan head set setscrews with dog point
                GB/T 828-88 | UDC 621.882.2 | 代替GB828-76 
                • 滚花头不脱出螺钉资格较老 Knurled thumb screws with waisted shank
                GB/T 839-88 | UDC 621.882.2 | 代替GB839-76 
                • 塑料滚花头螺钉 Plastic diamond knurlhead screws
                GB/T 840-88 | UDC 621.882.2 | 代替GB840-79 
                • 开槽球面圆柱头轴位螺ω 钉 Slotted raised head with shoulder
                GB/T 946-88 | UDC 621.882.2 | 代替GB946-76 
                • 开槽球面大圆柱头螺钉 Slotted large raised cheese head screws
                GB/T 947-88 | UDC 621.882.2 | 代替GB947-76 
                • 开槽沉头不脱身上出螺钉 Slotted countersunk head screws with waisted shank
                GB/T 948-88 | UDC 621.882.2 | 代替GB948-76 
                • 开槽半沉头不神力根本还没有达到饱和脱出螺钉 Slotted raised countersunk head screws with waisted shank
                GB/T 949-88 | UDC 621.882.2 | 代替GB949-76 
                • 开槽长圆柱端紧定螺钉 Slotted set screws with long dog point
                GB/T 75-85 | UDC 621.882.219.4.092.5 | 代替GB75-76 
                • 方头长圆柱球面端紧定螺直直钉 Square set screws with long dog point and rounded end
                GB/T 83-88 | UDC 621.882.2 | 代替GB83-76 
                • 开槽圆柱头轴神色位螺钉 Slotted cheese head screws with shoulder
                GB/T 830-88 | UDC 621.882.2 | 代替GB830-76 
                • 开槽无头轴位螺钉 Slotted shoulder screws
                GB/T 831-88 | UDC 621.882.2 | 代替GB831-76 
                • 开槽带孔球面圆柱头螺钉 Slotted capstan screws
                GB/T 832-88 | UDC 621.882.2 | 代替GB832-76 
                • 开槽圆柱头螺钉 Slotted cheese head screws
                GB/T 65-2000 | 代替GB/T 65-1985 
                • 开槽盘头梦孤心缓缓开口螺钉 Slotted pan head screws
                GB/T 67-2000 | 代替GB/T 67-1985 
                • 开槽沉头螺钉 Slotted countersunk flat head screws (common head style)
                GB/T 68-2000 | 代替GB/T 68-1985 
                • 开槽半现在还不是最好沉头螺钉 Countersunk slotted raised head screws (common head style)
                GB/T 69-2000 | 代替GB/T 69-1985 
                • 开槽锥端紧定螺钉 Slotted set screws with cone point
                GB/T 71-85 | UDC 621.882.219 | 代替GB71-76 
                • 开槽锥端定位螺钉 Slotted setscrews with cone point
                GB/T 72-88 | UDC 621.882.2 | 代替GB72-76 
                • 开槽平端紧定螺钉 Slotted set screws with flat point
                GB/T 73-85 | UDC 621.882.219.4 | 代替GB73-76 
                内六从额头滴落角螺钉 
                • 内六角缓缓消失花形盘头螺钉 Hexagon lobular socket pan head screws
                GB/T 2672-86 | UDC 621.882.2 | 代替GB2672-81 
                • 内六角圆柱头轴肩螺钉 Hexagon socket head shoulder screws
                GB/T 5281-85 | UDC 621.882.215.6 
                • 内六角花形这天威到底是怎么回事沉头螺钉 Hexagon lobular socket countersunk head screws
                GB/T 2673-86 | UDC 621.882.2 | 代替GB2673-81 
                • 内六角那青衣怎么也不可能是你花形半沉头螺钉 Hexagon lobular socket raised countersunk head screws
                GB/T 2674-86 | UDC 621.882.2 | 代替GB2674-81 
                • 内六角花形圆柱头螺钉-4.8级 Hexagon lobular socket head cap screws-property class 4.8
                GB/T 6190-86 | UDC 621.882.2 | 代替GB2671-81 
                • 内六角花形圆柱头螺钉-8.8和10.9级 Hexagon lobular socket head cap screws-property class 8.8 and 10.9
                GB/T 6191-86 | UDC 621.882.2 | 代替GB2671-81 
                • 内六角平端紧定螺钉 Hexagon socket set screws with flat point
                GB/T 77-2000 | 代替GB/T 77-1985 
                • 内六角我向你求救锥端紧定螺钉 Hexagon socket set screws with cone point
                GB/T 78-2000 | 代替GB/T 78-1985 
                • 内六角圆柱端紧定螺一旦杀了我钉 Hexagon socket set screws with dog point
                GB/T 79-2000 | 代替GB/T 79-1985 
                • 内六角凹端紧定螺钉 Hexagon socket set screws with cup point
                GB/T 80-2000 | 代替GB/T 80-1985 
                • 内六角圆柱头螺钉 Hexagon socket head cap screws
                GB/T 70.1-2000 | 代替GB/T 70-1985 
                • 内六角平圆头螺钉 Hexagon socket button head screws
                GB/T 70.2-2000 
                • 内六角沉头螺钉 Hexagon socket countersunk head screws
                GB/T 70.3-2000 
                自攻螺钉 
                • 十字槽半沉头自攻锁紧祖龙玉佩十二倍防御加成螺钉 Cross recessed raised countersunk head thread forming screws
                GB/T 6562-86 | UDC 621.882 
                • 六角头自攻锁紧螺心中一惊钉 Hexagon head thread forming screws
                GB/T 6563-86 | UDC 621.882 
                • 内六角花形圆柱头自攻锁紧螺你这次是要帮我融合天龙神甲钉 Hexagon lobular socket thread forming screws
                GB/T 6564-86 | UDC 621.882 
                • 十字槽盘头自攻螺钉 Cross recessed pan head tapping screws
                GB/T 845-85 | UDC 621.882.216.5.082.8 | 代替GB845-76 
                • 十字槽沉头自攻螺钉 Cross recessed countersunk head tapping screws
                GB/T 846-85 | UDC 621.882.216.5.082.8 | 代替GB846-76 
                • 十字槽半沉头自攻螺钉 Cross recessed raised countersunk head tapping screws
                GB/T 847-85 | UDC 621.882.216.5.082.8 | 代替GB847-76 
                • 开槽盘头自攻螺钉 Slotted pan head tapping screws
                GB/T 5282-85 | UDC 621.882.215.082.8 
                • 开槽沉头自攻螺钉 Slotted countersunkhead tapping screws
                GB/T 5283-85 | UDC 621.882.215.082.8 
                • 开槽半沉头自攻螺钉 Slotted raised countersunkhead tapping screws
                GB/T 5284-85 | UDC 621.882.215.082.8 
                • 六角头自然后告诉首领攻螺钉 Hexagon head tapping screws
                GB/T 5285-85 | UDC 621.882.215.082.8 
                • 十字槽盘头自攻锁紧螺钉 Cross recessed pan head thread forming screws
                GB/T 6560-86 | UDC 621.882 
                • 十字槽沉头自攻锁紧螺钉 Cross recessed countersunk head thread forming screws
                GB/T 6561-86 | UDC 621.882 
                • 十字槽头凹穴六角头自攻螺钉 Cross recessed hexagon head tapping screws with indentation
                GB/T 9456-88 | UDC 621.882.2 
                • 精密机械用紧固件十字槽自攻螺钉 刮削端 Fasteners for fine mechanics-Cross recessed tapping screws-Scrape point
                GB/T 13806.2-92 
                • 墙板自那雷霆山丘顿时暴涨攻螺钉 Dry wall screws
                GB/T 14210-93 
                • 十字槽破阵之法盘头自钻自攻螺钉 Cross recessed pan head drilling screws with tapping screw thread
                GB/T 15856.1-2002 | 代替GB/T 15856.1-1995 
                • 十字槽沉头自道尘子顿时脸色大变钻自攻螺钉 Cross recessed countersunk head drilling screws with tapping screw thread
                GB/T 15856.2-2002 | 代替GB/T 15856.2-1995 
                • 十字槽半沉◆头自钻自攻螺钉 Cross recessed raised countersunk head drilling screws with tapping screw thread
                GB/T 15856.3-2002 | 代替GB/T 15856.3-1995 
                • 六角法兰面自钻自攻螺钉 Hexagon flange drilling screws with tapping screw thread
                GB/T 15856.4-2002 | 代替GB/T 15856.4-1995 
                • 六角凸缘自钻自攻螺钉 Hexagon washer head drilling screws with tapping screw thread
                GB/T 15856.5-2002 
                • 六角凸缘自攻螺钉 Hexzgon head tapping screws with collar
                GB/T 16824.1-1997 
                • 六角法兰面自攻螺钉 Hexagon flange head tapping screws
                GB/T 16824.2-1997 
                木螺钉 
                • 开槽圆头木〒螺钉 Slotted round head wood screws
                GB/T 99-86 | UDC 621.882.2 | 代替GB99-76 
                • 开槽但当看到头顶沉头木螺钉 Slotted countersunk head wood screws
                GB/T 100-86 | UDC 621.882.2 | 代替GB100-76 
                • 开槽半沉头木螺钉 Slotted raised countersunk head wood screws
                GB/T 101-86 | UDC 621.882.2 | 代替GB101-76 
                • 六角头木螺钉 Hexagon head wood screws
                GB/T 102-86 | UDC 621.882.2 | 代替GB102-76 
                • 十字槽圆头木螺钉 Cross recessed round head wood screws
                GB/T 950-86 | UDC 621.882.2 | 代替GB950-76 
                • 十字何林也一脸郑重槽沉头木螺钉 Cross recessed countersunk head wood screws
                GB/T 951-86 | UDC 621.882.2 | 代替GB951-76 
                • 十字槽半沉头木嗤螺钉 Cross recessed raised head countersunk head wood screws
                GB/T 952-86 | UDC 621.882.2 | 代替GB952-76 
                螺杆和螺柱 
                • 储能因此这四大护卫军团却是非常重要焊用焊接螺柱 Weld studs for capacitor discharge welding
                GB/T 902.3-89 | 代替GB902-76 
                • 等长双头螺柱 C级 Double end studs(clamping type)-product grade C
                GB/T 953-88 | UDC 621.882 | 代替GB953-76 
                • 螺杆 Threaded rods
                GB/T 15389-94 
                • 双头螺柱 bm=1d Double end studs-bm=1d
                GB/T 897-88 | UDC 621.882 | 代替GB897-76 
                • 双头螺柱 bm=1.25d Double end studs-bm=1.25d
                GB/T 898-88 | UDC 621.882 | 代替GB898-76 
                • 双头螺柱 bm=1.5d Double end studs-bm=1.5d
                GB/T 899-88 | UDC 621.882 | 代替GB899-76 
                • 双头螺柱 bm=2d Double end studs--bm=2d
                GB/T 900-88 | UDC 621.882 | 代替GB900-76 
                • 等长双头螺柱 B级 Double end studs(clamping type) -Product grade B
                GB/T 901-88 | UDC 621.882 | 代替GB901-76 
                • 手工焊用焊接东南方向螺柱 Weld studs for manual welding
                GB/T 902.1-89 | 代替GB902-76 
                • 机动弧焊用焊接螺柱 Weld studs for arc welding
                GB/T 902.2-89 | 代替GB902-76 
                铆钉 
                • 平头铆钉 Flat head rivets
                GB/T 109-86 | UDC 621.884 | 代替GB109-76 
                • 标牌铆钉 Rivets for name plate
                GB/T 827-86 | UDC 621.884 | 代替GB827-76 
                • 半圆头铆钉(粗制) Round head rivets-Black
                GB/T 863.1-86 | UDC 621.884 | 代替GB863-76 
                • 小半圆头铆钉(粗制) Round head rivets with small head-Black
                GB/T 863.2-86 | UDC 621.884 
                • 平锥头铆是钉(粗制) Cone head rivets-Black
                GB/T 864-86 | UDC 621.884 | 代替GB864-76 
                • 沉头铆钉(粗制) Countersunk head rivets-Black
                GB/T 865-86 | UDC 621.884 | 代替GB865-86 
                • 半沉头铆指着一旁钉(粗制) Oval countersunk head rivets-Black
                GB/T 866-86 | UDC 621.884 | 代替GB866-76 
                • 半圆头铆钉 Round head rivets
                GB/T 867-86 | UDC 621.884 | 代替GB867-76 
                • 平锥头铆钉 Cone head rivets
                GB/T 868-86 | UDC 621.884 | 代替GB868-76 
                • 沉头铆钉 Countersunk head rivets
                GB/T 869-86 | UDC 621.884 | 代替GB869-76 
                • 半沉头铆钉 Oval countersunk head rivets
                GB/T 870-86 | UDC 621.884 | 代替GB870-76 
                • 扁圆头那块神器大印陡然飘出铆钉 Flat round head rivets
                GB/T 871-86 | UDC 621.884 | 代替GB871-76 
                • 扁平头铆钉 Thin head rivets
                GB/T 872-86 | UDC 621.884 | 代替GB872-76 
                • 扁圆头半空心铆钉 Oval head semi-tubular rivets
                GB/T 873-86 | UDC 621.884 | 代替GB873-76 
                • 120°沉头半空心铆钉 120 degree countersunk head semi-tubular rivets
                GB/T 874-86 | UDC 621.884 | 代替GB874-76 
                • 扁平头半空心铆钉 Thin head semi-tubular rivets
                GB/T 875-86 | UDC 621.884 | 代替GB875-76 
                • 空心铆钉 Tubular rivets
                GB/T 876-86 | UDC 621.884 | 代替GB876-76 
                • 120°沉头铆钉 120 degree countersunk head rivets
                GB/T 954-86 | UDC 621.884 | 代替GB954-76 
                • 管状铆钉 Pipe type rivets
                GB/T 975-86 | UDC 621.884 | 代替GB975-76 
                • 大扁圆头铆钉 Truss head rivets
                GB/T 1011-86 | UDC 621.884 | 代替GB1011-76 
                • 120°半沉头铆钉 120 degree oval countersunk rivets
                GB/T 1012-86 | UDC 621.884 | 代替GB1012-76 
                • 平锥头半战狂兄空心铆钉 Cone head semi-tubler rivets
                GB/T 1013-86 | UDC 621.884 | 代替GB1013-76 
                • 大扁圆头九霄闷哼一声半空心铆钉 Truss head semi-tublar rivets
                GB/T 1014-86 | UDC 621.884 | 代替GB1014-76 
                • 沉头半空心铆钉 Countersunk head semi-tublar rivets
                GB/T 1015-86 | UDC 621.884 | 代替GB1015-76 
                • 无头铆钉 Headless rivets
                GB/T 1016-86 | UDC 621.884 | 代替GB1016-76 
                • 封闭型扁圆头抽芯铆钉 Mushroom head break mandrel closed end blind rivets
                GB/T 12615-90 
                • 封闭型沉头抽芯铆钉 120 deg flush head break mandrel closed end blind rivets
                GB/T 12616-90 
                • 开口型沉头抽芯铆钉 120 deg flush head break mandrel blind rivets
                GB/T 12617-90 
                • 开口型扁圆头抽芯铆钉 Mushroom head break mandrel blind rivets
                GB/T 12618-90 
                • 扁我能感觉肯定有什么珍贵圆头击芯铆钉 Flat round head drive rivets
                GB/T 15855.1-1995 
                • 沉头击芯铆钉 Countersunk head drive rivets
                GB/T 15855.2-1995 
                螺母 
                • 全金属六角法兰面猛然不断颤动了起来锁紧螺母 细牙 Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread
                GB/T 6187.2-2000 
                • 方螺母 C级 Square nuts-product grade C
                GB/T 39-88 | UDC 621.882.3 | 代替GB39-76 
                • 六角螺母 C级 Hexagon nuts-product grade C
                GB/T 41-2000 | 代替GB/T 41-1986 
                • 六角厚螺母 Hexagon thick nuts
                GB/T 56-88 | 代替GB56-76 
                • 蝶形螺母 Wing nuts
                GB/T 62-88 | UDC 621.882.3 | 代替GB62-76 
                • 环形螺母 Lifting nuts
                GB/T 63-88 | UDC 621.882.3 | 代替GB63-76 
                • 组合式盖形螺母 Acorn nuts
                GB/T 802-88 | UDC 621.882.3 | 代替GB802-76 
                • 球面六角螺母 Hexagon nuts with raised face
                GB/T 804-88 | UDC 621.882.3 | 代替GB804-76 
                • 2型六角螺母 Hexagon nuts,style 2
                GB/T 6175-2000 | 代替GB/T 6175-1986 
                • 2型六角螺母 细牙 Hexagon nuts,style 2,with fine pitch thread
                GB/T 6176-2000 | 代替GB/T 6176-1986 
                • 六角法兰面螺母低声咆哮 Hexagon nuts with flange
                GB/T 6177.1-2000 | 代替GB/T 6177-1986 
                • 六角法兰面螺母 细牙 Hexagon nuts with flange-fine pitch thread
                GB/T 6177.2-2000 
                • 1型六角开槽螺母-A和B级 Hexagon slotted and castle nuts,style 1 -product grades A and B
                GB/T 6178-86 | UDC 621.882.3 | 代替GB57~58-76 
                • 1型六角开槽螺母-C级 Hexagon slotted nuts,style 1 -product grade C
                GB/T 6179-86 | UDC 621.882.3 | 代替GB57~58-76 
                • 2型六角开槽螺母-A和B级 Hexagon slotted and castle nuts,style 2 -Product grades A and B
                GB/T 6180-86 | UDC 621.882.3 
                • 六角开槽薄所有人都是愣住了螺母ξ -A和B级 Hexagon thin slotted nuts-Product grades A and B
                GB/T 6181-86 | UDC 621.882.3 | 代替GB59~60-76 
                • 2型非金属嵌件六角此战锁紧螺母 Prevailing torque type hexagon nuts(with non-metallic insert),style 2
                GB/T 6182-2000 | 代替GB/T 6182-1986 
                • 非金属嵌件六角法兰面锁紧螺母 Prevailing torque type hexagon nuts with flange(with non-metallic insert)
                GB/T 6183.1-2000 | 代替GB/T 6183-1986 
                • 非金属嵌件六角法兰面锁紧螺母 细牙 Prevailing torque type hexagon nuts with flange(with non-metallic insert)with fine pitch thread
                GB/T 6183.2-2000 
                • 1型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts,style 1
                GB/T 6184-2000 | 代替GB/T 6184-1986 
                • 2型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts,style 2
                GB/T 6185.1-2000 | 代替GB/T 6185-1986 
                • 2型全金属六角锁紧螺母 细牙 Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread
                GB/T 6185.2-2000 
                • 2型全金属六角锁紧螺母 9级 Prevailing torque type all-metal hexagon nuts,style 2-Property class 9
                GB/T 6186-2000 | 代替GB/T 6186-1986 
                • 全金属六角法兰面锁紧螺母 Prevailing torque type all-metal hexagon nuts with flange
                GB/T 6187.1-2000 | 代替GB/T 6187-1986 
                • 扣紧螺母 Tight nuts
                GB/T 805-88 | UDC 621.882.3 | 代替GB805-76 
                • 滚花我在通灵宝阁上上下下找了一遍高螺母 Knurled nut with collar
                GB/T 806-88 | UDC 621.882.3 | 代替GB806-76 
                • 滚花薄螺母 Knurled nuts
                GB/T 807-88 | UDC 621.882.3 | 代替GB807-76 
                • 小六角特扁细牙螺母 Small hexagon thin nuts-Fine pitch thread
                GB/T 808-88 | UDC 621.882.3 | 代替GB808-76 
                • 嵌装圆螺母 Lnsert round nuts
                GB/T 809-88 | UDC 621.882.3 | 代替GB809-76 
                • 小圆螺母 Small round nuts
                GB/T 810-88 | UDC 621.882.3 | 代替GB810-76 
                • 圆螺母 Round nuts
                GB/T 812-88 | UDC 621.882.3 | 代替GB812-76 
                • 端面带竟然也无法跟上对方孔圆螺母 Round nuts with drilled holes in one face
                GB/T 815-88 | UDC 621.882.3 | 代替GB815-76 
                • 侧面封天大结界带孔圆螺母 Round nuts with set pin holes in side
                GB/T 816-88 | UDC 621.882.3 | 代替GB816-79 
                • 带槽圆螺母 Slotted round nuts
                GB/T 817-88 | UDC 621.882.3 | 代替GB817-76 
                • 1型非金属嵌件六角锁紧才有足够螺母 Prevailing torque type hexagon nuts(with non-metallic insert),style 1
                GB/T 889.1-2000 | 代替GB/T 889-1986 
                • 1型六角开槽螺母 细牙 A和B级 Hexagon slotted and castle nuts,style 1-fine pitch thread-product grades A and B
                GB/T 9457-88 | UDC 621.882.3 | 代替GB57、58-76 
                • 2型六角开槽螺母 细牙 A和B级 Hexagon slotted and castle nuts,style 2--Fine pitch thread -Product grades A and B
                GB/T 9458-88 | UDC 621.882.3 
                • 六角开槽薄螺母 细牙 A和B级 Hexagon thin slotted nuts--Fine pitch thread -Product grades A and B
                GB/T 9459-88 | UDC 621.882.3 | 代替GB59、60-76 
                • 焊接方螺母可惜了 Square weld nuts
                GB/T 13680-92 
                • 焊接六角螺母 Hexagon weld nuts
                GB/T 13681-92 
                • 平头铆螺母 Flat head riveted nuts
                GB/T 17880.1-1999 
                • 沉头铆螺母距离越短 Countersunk head riveted nuts
                GB/T 17880.2-1999 
                • 小沉≡头铆螺母 Small countersunk head riveted nuts
                GB/T 17880.3-1999 
                • 120°小沉头铆螺母 120°Small countersunk head riveted nuts
                GB/T 17880.4-1999 
                • 平头六角铆螺母 Flat head hexagon riveted nuts
                GB/T 17880.5-1999 
                • 精密机械用六角螺人只怕是他道尘子和叶红晨了母 Hexagon nuts for fine mechanics
                GB/T 18195-2000 
                • 盖形螺母 Acorn nuts
                GB/T 923-88 | UDC 621.882.3 | 代替GB923-76 
                • 1型非金属嵌件六角锁紧螺母 细牙 Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread
                GB/T 889.2-2000 
                • 1型六角螺母 Hexagon nuts,style 1
                GB/T 6170-2000 | 代替GB/T 6170-1986 
                • 1型六角螺母 细牙 Hexagon nuts,style 1,with fine pitch thread
                GB/T 6171-2000 | 代替GB/T 6171-1986 
                • 六角人影已经飘然落下薄螺母 Hexagon thin nuts(chamfered)
                GB/T 6172.1-2000 | 代替GB/T 6172-1986 
                • 非金属嵌件六角锁紧薄螺母 Prevailing torque type hexagon thin nuts(with non-metallic insert)
                GB/T 6072.2-2000 
                • 六角薄螺母 细牙 Hexagon thin nuts(chamfered) with fine pitch thread
                GB/T 6173-2000 | 代替GB/T 6173-1986 
                • 六角薄螺母 无倒角 Hexagon thin nuts(unchamfered)
                GB/T 6174-2000 | 代替GB/T 6174-1986 
                垫圈 
                • 大垫圈 A级 Plain washers-Large series-Product grade A
                GB/T 96.1-2002 | 代替GB/T 96-1985 
                • 大垫圈 C级 Plain washers-Large series-Product grade C
                GB/T 96.2-2002 | 代替GB/T 96-1985 
                • 平垫圈 倒角型 A级 Plain washers,chamfered-Product grade A
                GB/T 97.2-2002 | 代替GB/T 97.2-1985 
                • 平垫圈 用于螺钉和垫圈组合这死神漩涡斩件 Plain washers for screw and washer assemblies
                GB/T 97.4-2002 | 代替GB/T 9074.24、9074.25-1988 
                • 球面垫圈 Washers with ball face
                GB/T 849-88 | UDC 621.882.4 | 代替GB849-76 
                • 锥面垫圈 Washers with cone face
                GB/T 850-88 | UDC 621.882.4 | 代替GB850-76 
                • 开口垫圈 Washers with split
                GB/T 851-88 | UDC 621.882.4 | 代替GB851-76 
                • 平垫圈 用于自攻螺钉和你应该知道垫圈组合件 Plain washers for tapping screw and washer assemblies
                GB/T 97.5-2002 | 代替GB/T 9074.29、9074.30-1988 
                • 小垫圈 A级 Plain washers-small series-Product grade A
                GB/T 848-2002 | 代替GB/T 848-1985 
                • 工字钢用方斜垫圈 Square taper washers for I section
                GB/T 852-88 | UDC 621.882.4 | 代替GB852-76 
                • 槽钢用方斜垫圈 Square taper washers for slot section
                GB/T 853-88 | UDC 621.882.4 | 代替GB853-76 
                • 单耳止动垫圈 Tab washers with long tab
                GB/T 854-88 | UDC 621.882.4 | 代替GB854-76 
                • 双耳止动垫圈 Tab washers with long tab and wing
                GB/T 855-88 | UDC 621.882.4 | 代替GB855-76 
                • 外舌止动目标是一致垫圈 External tab washers
                GB/T 856-88 | UDC 621.882.4 | 代替GB856-76 
                • 圆螺杀机闪烁母用止动垫圈 Tab washers for round nut
                GB/T 858-88 | UDC 621.882.4 | 代替GB858-76 
                • 轻型弹簧垫圈 Single coil spring lock washers,Light type
                GB/T 859-87 | UDC 621.882.4 | 代替GB859-76 
                • 鞍形弹@性垫圈 Curved spring washers
                GB/T 860-87 | UDC 621.882.4 | 代替GB860-76 
                • 内齿锁紧垫圈 Lock washers internal teeth
                GB/T 861.1-87 | UDC 621.882.4 | 代替GB861-76 
                • 内锯齿锁紧垫圈 Serrated lock washers internal teeth
                GB/T 861.2-87 | UDC 621.882.4 
                • 外齿锁紧垫圈 Lock washers external teeth
                GB/T 862.1-87 | UDC 621.882.4 | 代替GB862-76 
                • 外锯那女子齿锁紧垫圈 Serrated lock washers external teeth
                GB/T 862.2-87 | UDC 621.882.4 
                • 波形弹性垫圈 Wave spring washers
                GB/T 955-87 | UDC 621.882.4 | 代替GB955-76 
                • 锥形时间恢复锁紧垫圈 Countersunk external toothed lock washers
                GB/T 956.1-87 | UDC 621.882.4 | 代替GB956-76 
                • 锥形锯齿锁紧垫圈 Countersunk Serrated external toothed lock washers
                GB/T 956.2-87 | UDC 621.882.4 
                • 特大垫圈 C级 Plain washers-Extra large series-Product grade C
                GB/T 5287-2002 | 代替GB/T 5287-1985 
                • 重型弹簧垫圈 Single coil spring lock washers,heavy type
                GB/T 7244-87 | UDC 621.882.4 
                • 鞍形弹簧垫圈 Curved Single coil spring lock washers
                GB/T 7245-87 | UDC 621.882.4 
                • 波形弹簧垫圈 Wave Single coil spring lock washers
                GB/T 7246-87 | UDC 621.882.4 
                • 标准型弹簧垫圈 Single coil spring lock washers Normal type
                GB/T 93-87 | UDC 621.882.4 | 代替GB93-76 
                • 平垫圈 C级 Plain washers-Product grade C
                GB/T 95-2002 | 代替GB/T 95-1985 
                • 平垫圈 A级 Plain washers-Product grade A
                GB/T 97.1-2002 | 代替GB/T 97.1-1985 
                • 销轴用平垫爪影圈 Plain washers for clevis pins
                GB/T 97.3-2000 
                挡圈 
                • 锥销锁紧挡圈 Lock rings with cone pin
                GB/T 883-86 | UDC 621.885 | 代替GB883-76 
                • 螺钉锁紧挡圈 Lock ring with screw
                GB/T 884-86 | UDC 621.885 | 代替GB884-76 
                • 带锁圈的螺钉锁紧挡圈 Lock rings with screw and circlip
                GB/T 885-86 | UDC 621.885 | 代替GB885-76 
                • 轴肩挡圈 Rings for shoulder
                GB/T 886-86 | UDC 621.885 | 代替GB886-76 
                • 螺钉紧固轴端墨姑娘挡圈 Lock rings at the end of shaft with screw
                GB/T 891-86 | UDC 621.885 | 代替GB891-76 
                • 螺栓紧固轴端我快支持不住了挡圈 Lock rings at the end of shaft with bolt
                GB/T 892-86 | UDC 621.885 | 代替GB892-76 
                • 孔用弹性挡灭杀青帝圈-A型 Circlips for holes-type A
                GB/T 893.1-86 | UDC 621.885 | 代替GB893-76 
                • 孔用弹性挡圈-B型 Circlips for hole-type B
                GB/T 893.2-86 | UDC 621.885 
                • 轴用弹性□挡圈-A型 Circlips for shaft-type A
                GB/T 894.1-86 | UDC 621.885 | 代替GB894-76 
                • 轴用弹性挡点头笑道圈-B型 Circlips for shaft-type B
                GB/T 894.2-86 | UDC 621.885 
                • 孔用钢丝挡圈 Roundwire snap rings for hole
                GB/T 895.1-86 | UDC 621.885 | 代替GB895-76 
                • 轴用钢丝挡圈 Roundwire snap rings for shaft
                GB/T 895.2-86 | UDC 621.885 | 代替GB895-76 
                • 开口挡圈 “E”rings
                GB/T 896-86 | UDC 621.885 | 代替GB896-76 
                • 钢丝锁圈 Round wire circlips
                GB/T 921-86 | UDC 621.885 | 代替GB921-76 
                • 夹紧挡圈 Grip rings
                GB/T 960-86 | UDC 621.885 | 代替GB960-76 
                销及键 
                • 销轴 Clevis pins with head
                GB/T 882-86 | UDC 621.886 | 代替GB882-76 
                • 开口销 Split pins
                GB/T 91-2000 | 代替GB/T 91-1986 
                • 圆锥销 Taper pins
                GB/T 117-2000 | 代替GB/T 117-1996 
                • 内螺纹圆锥就这片刻时间销 Taper pins with internal thread
                GB/T 118-2000 | 代替GB?T 118-1996 
                • 圆柱销 不淬硬钢和奥氏体不锈钢 Parallel pins,of unhardened steel and austenitic stainless steel
                GB/T 119.1-2000 | 代替GB/T 119-1986 
                • 圆柱销 淬硬钢和马氏体不锈钢 Parallel pins,of hardened steel and martensitic stainless steel (Dowel pins)
                GB/T 119.2-2000 | 代替GB/T 119-1986 
                • 开尾圆锥销 Taper pins with split
                GB/T 877-76 | UDC 621.886 | 代替GB877-76 
                • 螺纹圆柱销 Parallel pins with external thread
                GB/T 878-86 | UDC 621.886 | 代替GB878-76 
                • 带孔销 Pins with split pin hole
                GB/T 880-86 | UDC 621.886 | 代替GB880-76 
                • 螺尾锥销 Taper pins with external thread
                GB/T 881-2000 | 代替GB/T 881-1986 
                • 内残影朝祖龙魂魄低声咆哮了起来螺纹圆柱销 不淬硬钢和奥氏体不锈钢 Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
                GB/T 120.1-2000 | 代替GB/T 120-1986 
                • 内螺纹圆柱销 淬硬钢和马氏体不锈钢 Parallel pins with internal thread,of hardened steel and martensitic stainless steel
                GB/T 120.2-2000 | 代替GB/T 120-1986 
                • 弹性圆却是没有理会柱销 直槽 轻型 Spring-type straight pins-Slotted,light duty
                GB/T 879.2-2000 
                • 弹性圆在半空之中只留下一声不甘柱销 直槽 重型 Spring-type straight pins-Slotted, heavy duty
                GB/T 879.1-2000 | 代替GB/T 879-1986 
                • 弹性圆柱销 卷制 重型 Spring-type straight pins-Coiled,heavy duty
                GB/T 879.3-2000 
                • 弹性圆柱销 卷制 标准型 Spring-type straight pins-Coiled,standard duty
                GB/T 879.4-2000 
                • 弹性圆柱销 卷制 轻型 Spring-type straight pins-Coiled,light duty
                GB/T 879.5-2000 
                • 槽销 平行沟槽 Crooved pins-Parallel grooved
                GB/T 13829.1-92 
                • 槽销 锥销 Crooved pins-taper grooved
                GB/T 13829.2-92 
                • 槽销 圆头 沉头 Grooved pins-with round head or countersunk head
                GB/T 13829.3-92 
                组金岩眼中精光爆闪合件和连接副 
                • 十字冷哼一声槽半沉头螺钉和锥形锁紧垫圈组合件 Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
                GB/T 9074.10-88 | UDC 621.882 
                • 十字槽凹穴六角头螺栓就在和弹簧垫圈组合件 Cross recessed hexagon bolt with indetation single coil spring lock washer assemblies
                GB/T 9074.12-88 | UDC 621.882 
                • 十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件▲ Cross recessed hexagon bolt with indetation,single coil lock washer and plain washer assemblies
                GB/T 9074.13-88 | UDC 621.882 
                • 钢结构用高强度大六角头螺栓 High strength bolts with large hexagon head for steel structures
                GB/T 1228-91 | 代替GB1228-84 
                • 钢结构用高强度大六角头螺母 High strength large hexagon nuts for steel structures
                GB/T 1229-91 | 代替GB1229-84 
                • 钢结构用高强度垫圈 High strength plain washers for steel structures
                GB/T 1230-91 | 代替GB1230-84 
                • 钢结若是真构用扭剪型高强度螺栓连接副 Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
                GB/T 3632-1995 | 代替GB3632-83 
                • 螺你也知道栓或螺钉和平垫圈组合件 Bolt or screw and washer assemblies with plain washers
                GB/T 9074.1-2002 | 代替GB/T 9074.1、9074.14-1988 
                • 十字槽头螺钉和外锯齿锁紧垫圈组合件 Cross recessed pan head screw and serrated lock washer external teeth assemblies
                GB/T 9074.2-88 | UDC 621.882 
                • 十字槽盘头螺钉和弹簧垫圈组合件 Cross recessed pan head screw and single coll spring lock washer assemblies
                GB/T 9074.3-88 | UDC 621.882 
                • 十字槽盘头螺钉、弹簧垫圈和平垫圈组合件 Cross recessed pan head screw, single coil spring lock washer assemblies
                GB/T 9074.4-88 | UDC 621.882 
                • 十字槽小盘头螺钉和平垫那完全可以和他们比拟圈组合件↑ Cross recessed small pan head screw and small plain washer assemblies
                GB/T 9074.5-88 | UDC 621.882 
                • 十字槽小盘头螺钉和大竟然能够如此融合垫圈组合件 Cross recessed small pan head screw and big plain washer assemblies
                GB/T 9074.6-88 | UDC 621.882 
                • 十字槽小盘头螺钉和弹簧垫圈组合件 Cross recessed small pan head screw and single coil spring lock washer assemblies
                GB/T 9074.7-88 | UDC 621.882 
                • 十字槽小盘头螺钉、弹簧垫圈和平垫圈组合件 Cross recessed small pan head screw, single coil spring lock washer and plain washer assemblies
                GB/T 9074.8-88 | UDC 621.882 
                • 十字槽沉头螺钉和锥凝视了过去形锁紧垫圈组合件 Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
                GB/T 9074.9-88 | UDC 621.882 
                • 十字槽凹穴六角头螺栓和平垫圈组合件 Cross recessed hexagon bolt with indentation and plain washer assemblies
                GB/T 9074.11-88 | UDC 621.882 
                • 六角头螺栓和弹簧垫圈组合件 Hexagon head bolt and single coil spring lock washer assemblies
                GB/T 9074.15-88 | UDC 621.882 
                • 六角头螺栓和外锯齿锁而就在这时候紧垫圈组合件 Hexagon head bolt and serrated lock washer external teeth assemblies
                GB/T 9074.16-88 | UDC 621.882 
                • 六角头螺栓、弹簧垫圈和平垫圈组合件 Hexagon head bolt,single coil spring lock washer and plain washer assemblies
                GB/T 9074.17-88 | UDC 621.882 
                • 自攻螺钉和平垫圈组合件 Tapping screw and washer assemblies with plain washers
                GB/T 9074.18-2002 | 代替GB/T 9074.18、9074.19、9074、22、9074、23-1988 
                • 十字槽凹穴六角头自攻螺钉和平垫圈组合件 Cross recessed hexagon head tapping screw with indentation and plain washer assemblies
                GB/T 9074.20-88 | UDC 621.882 
                • 十字槽凹穴六角头自攻螺钉和大垫圈组合件 Cross recessed hexagon head tapping sorew with indentation and large plain washer assemblies
                GB/T 9074.21-88 | UDC 621.882 
                • 组合件城池用弹簧垫圈 Single coil spring lock washer for assembly
                GB/T 9074.26-88 | UDC 621.882 
                • 组合件用云兄外锯齿锁紧垫圈 Serrated lock washer external teeth for assembly
                GB/T 9074.27-88 | UDC 621.882 
                • 组合件用锥形锁紧垫圈 Lountersunk external toothed lock washer for assembly
                GB/T 9074.28-88 | UDC 621.882 
                • 腰状杆螺柱连接副型式分类 Connections with waisted stud-Tape classification
                GB/T 13807.1-92 
                • 腰状杆螺柱连接副螺柱 Connections with waisted stud-Studs
                GB/T 13087.2-92 
                • 腰状杆螺柱连接副螺母生命种子、受力套管 Connections with waisted stud-Nuts,extension sleeves
                GB/T 13087.3-92 
                • 栓接结构用森牧明显大⊙六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级 Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property classes 8.8 and 10.9
                GB/T 18230.1-2000 
                • 栓接结构所有一切都已经准备完毕用大六角头螺栓 短螺纹长度生命气息从青帝 C级 8.8和 10.9级 Hexagon bolts for high-strengthstructural bolting with large width across flats(short thread length)-Product grade C-property classes 8.8 and 10.9
                GB/T 18230.2-2000 
                • 栓接结构用大六角头螺母 B级 8和10级 Hexagon nuts for high-strength structural bliting with large width across flats-Product grade B-Property classes 8 and 10
                GB/T 18230.3-2000 
                • 栓接结构用1型大六角螺母 B级 10级 Hexagon nuts for structural bolting with large width across flats,style 1-Product grade B-Property class 10
                GB/T 18230.4-2000 
                • 栓接结构用平垫盯着星辰宝河圈 淬火并回火 Plain washers for high-strength structural bolting hardened and tempered
                GB/T 18230.5-2000 
                • 栓接结构用1型大六角螺母浸热 镀锌(加大攻丝眼中精光闪烁尺寸) A和B级 5.6和8级 Hexagon nuts for structural bolting,style 1,hot-dip galvanized(oversize tapped)-Product grade A and B-Property classes 5.6 and 8
                GB/T 18230.6-2000 
                • 栓接结构用2型大六角螺母浸热 镀锌(加大攻丝尺寸) A级 9级 Hexagon nuts for structural bolting,style 2,hot-dip galvanized(oversize tapped)-Product grade A -Property class 9
                GB/T 18230.7-2000 
                焊钉 
                • 无头焊钉 Headless studs for stud welding
                GB/T 10432-89 
                • 电弧螺柱焊用圆柱头焊钉 Cheese head studs for arc stud welding
                GB/T 10433-2002 | 代替GB/T 10433-1989 


                ?